Original price was: $538.00.$94.99Current price is: $94.99.
- Safe and Secure Payments, Always
- Experience the difference quality makes.
- Buy with confidence, backed by quality.
- Safe Shopping Guaranteed
Product Details
Rocker Type
C3 Camber
–
Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders. EJack, Jamie Lynn, and Fredi K’s favorite.
Flex
Medium-Stiff
–
Stout enough to charge your hardest but without excessive harshness.
Core
Split Construction
–
95% Lightweight Paulownia / 5% Aspen. Lighter. Environmentally nice. Tougher.
Laminates
Triaxial / Biaxial Fiberglass
Sidewalls
Birch Internal Sidewalls
UHMW Sintered Sidewalls
UHMW Tip / Tail Impact Deflection
Base
Eco Sublimated TNT Base
–
The highest density UHMW and fastest base material without wax. TNT features a unique dual-layer thermal fusion “phase alteration” process which aligns the molecular chains into an engineered crystalline structure. The titanium layer reflects light and heat, keeping the base at or near snow temperatures. The crystal layer is the fastest base material without wax, making it a very consistent sliding surface in a wide variety of conditions and wax wear lifecycles. Wax to conditions as normal, but the board will remain fast even as wax wears. TNT produces optimal graphic reproduction with the proprietary water based eco sublimation process. Easy to maintain easy to repair.
Edges
Magne-Traction®
–
Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.
Topsheet
Eco Sublimated Bio Beans Top
–
This plant oil based top material is environmentally friendly, rugged, scratch resistant and prints amazingly well with Mervin’s eco sublimation process.
Graphics
Art by Sandy Shore
Additional Features
Mervin Made
–
Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.
Binding Compatibility
Lightweight, Stainless Steel Karakoram Ultra Clips
–
For easy use, maximum assembled compression, and minimal seam shearing or rattle.
3D Clip Inserts
Fiber Reinforced Insert Array
Specs
- Terrain:
SplitboardingTerrain
Splitboarding
A splitboard snowboard is built specifically for the backcountry rider. Splitboards are designed to break down into two separate halves for touring and uphill travel (with climbing skins). Special bindings are required as well. Once you’ve reached the top of the terrain feature, you reconnect your splitboard for the ride back downhill. However, it’s important to note that you will need appropriate backcountry tools, knowledge of the backcountry, weather and snow conditions and climbing skins to safely take advantage of the freedom of a splitboard. - Ability Level:
Advanced-ExpertAbility Level
Advanced-Expert
Whether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you’ll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering. - Rocker Type:
Camber/Rocker/CamberRocker Type
Camber/Rocker/Camber
Camber/Rocker/Camber is a profile that’s specific to snowboards and which works because the rider’s weight flattens the two cambered areas. This design produces a strong, pressured carving zone between the rider’s feet and retains pop and carving precision at the tip and tail. - Shape:
Directional - Flex Rating:
StiffFlex Rating
Stiff
The amount a snowboard flexes varies significantly between boards. Snowboard flex ratings are not necessarily standardized across manufacturers, so the flex may vary from brand to brand. Many manufacturers will give a number rating ranging from 1-10, 1 being softest and 10 being stiffest. Here at evo we have standardized the manufacturers’ number ratings to a feel rating ranging from soft to very stiff. Generally you will find flex ratings of 1-2 as soft, 3-5 as medium, 6-8 as stiff, and 9-10 as very stiff. Flex ratings and feel may ultimately vary from snowboard to snowboard. - Core/Laminates:
Wood - Edge Tech:
Magne-Traction - Made in the USA:
Yes
- Warranty:
1 Year
| Size | 151 | 156 | 159 | 162W | 167W |
|---|---|---|---|---|---|
| Effective Edge (mm) | 1120 | 1150 | 1180 | 1190 | 1200 |
| Tip Width (mm) | 291 | 297 | 302 | 312 | 315 |
| Waist Width (mm) | 245 | 250 | 255 | 265 | 268 |
| Tail Width (mm) | 276 | 281 | 287 | 297 | 300 |
| Sidecut Radius (m) | 8.1 | 8.2 | 8.3 | 8.3 | 8.4 |
| Stance Setback (in) | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Stance Range (in) | 19.5-25 | 19.5-25 | 19.5-25 | 19.5-25 | 19.5-25 |
| Width | Regular | Regular | Regular | Wide | Wide |
| Size | 151, 156, 159, 162W, 167W |
|---|
Be the first to review “Lib Tech Split BRD Splitboard 2023”
Related products
All Mountain Snowboards
All Mountain Snowboards
All Mountain Snowboards
All Mountain Snowboards
Freeride Snowboards
Backcountry Snowboard Gear
All Mountain Snowboards
All Mountain Snowboards
Reviews
There are no reviews yet.